20 found, showing page 1 of 2
1701 STRAINER CRANK FOR HI-TENSI
Made Of Hot Rolled Flat Steel Formed To Fit The In-Line Strainer No.400-399. Durable Paint Finish To Prevent Rust.
- In-Line
- Fits The In-Line Strainer Model 400-399
- Made Of Hot-Rolled Flat Steel
- Durable Paint Finish Prevents Rust
View Details
Call for Price
ONLINE WIRE TIGHTNER
Made in the USA with a solid zinc cog and class 3 galvanized clip, the KIWI Online Wire Strainer is our strongest non-splicing strainer. Simply install without cutting the wire and tighten with a half-inch drive ratchet. Also handy for splicing and re-tensioning high-tensile wire.
- These strainers should not be used with coated wire products.
- Use Kencove's EZ Daisy Handle (TFD) or the Rapid Tightener (TFDR) to make installation fast and easy.
View Details
Call for Price
WOOD POST FENCE INSULATOR 25PK
Made Of Virgin, High Impact Polyethylene. Fastens To Post With Nail, J-Bolt Or Any Type Of Fastener. Raised Boss For Easy Removal Of Nail With Claw Hammer.
- Wood Post - Reusable
- Black - With Nails
View Details
Call for Price
IN-LINE STRAINER W/SPRING CLIP
- These strainers are used to keep tension on high tensile wire in a high tensile fence
- Tighten with 5/8 inch socket or #1701 handle
- Made in the USA
View Details
Call for Price
10" BRACE PINS
Galvanized brace pins make the H style end or corner braces neat, strong, and simple to install. They are used to hold the top horizontal rail in place between the end post and next brace post in the ground.
View Details
Call for Price
5" BRACE PINS
Galvanized Brace Pins make the H style end or corner braces neat, strong, and simple to install. They are used to hold the top horizontal rail in place between the end post and next brace post in the ground.
View Details
Call for Price
CRIMPING TOOL
High Quality Fence Repair Tool Quickly And Permanently Splices Barbed, Woven And High Tensile Smooth Wire. Much Faster, Easier And Stronger Than Twisting The Wire, Even Wire Too Rusty To Twist. Heavy Duty, 22'' Dual Purpose Wire Cutter/Splice Crimper With Adjustable Chrome-Moly Jaws. Attach A Wire Strecher To The Broken Or Stretched Out Wire To Remove Slack. Cut Out Slack, Or Add New Wire To Provide About 1-1/2'' Overlap. Slip Splice-It Splice (Sold Separately) Over Loose Ends And Crimp Four Times. Remove Stretcher And You Are Done. One Splice Quickly Joins Old And/Or New Wire. Splice Wire Too Rusty To Twist. Use Only With Spice-It Splices Which Allow You To Repair All Types Of Wire. (Part Nos. 663.6203, 663.6229, 663.6195, 663.6237, 663.6245 And 663.6211). Get Years More Life From Your Valuable Fence.
View Details
Call for Price
GRIPPING TORQUE TOOL FOR BRACING
The Gripple Torque Tool has a built-in 6:1 gearing system to deliver up to 800 pounds of load with minimal effort. Simply select the desired tension amount with the adjustable tension gauge and torque until it clicks. The integral torque gauge controls the load applied to the wire, giving consistent tension every time.
- Use with all sizes of Gripples
- Adjustable torque gauge to deliver consistent tension
- Lightweight and compact design
View Details
Call for Price
SLEEVES CRIMPING 12-1/2GA 100@
The gritted C2L sleeve is 70% longer than the C23 and requires at least two side by side crimps to achieve full strength. It can be used in place of the C23 sleeve in many applications. The C2L works especially well on Solidlock, Tightlock and other woven wire style fences because these fences are normally tightened to lower tensions. Use of the C2L in these applications saves money because you need only one sleeve per line splice versus two of the C23 size. For use with 16 - 12.5 gauge wire.
- Made in USA.
View Details
Call for Price
WRAP-AROUND INSULATOR (10@)
A sturdy 20-inch UV-stabilized polyethylene sheath ensures wire wraps comfortably around corner and end posts while an aluminum insert prevents wire from cutting through the plastic. Easy installation combined with a durable design makes the wraparound insulator a must-have for wire fences using wooden posts.
View Details
Call for Price
4" INSULATOR TUBE (200@)
Tube insulators are the lowest cost option for high-tensile fences. It is installed by sliding the appropriate number (corresponding to the number of posts) onto the end of the wire. Push the group of insulators down the wire and each tube as you proceed down the line. Be sure to staple in far enough so the tube cannot easily slide away from the post, but not so hard that it restricts wire movement.
- 4" tube, 2 fin (flange), 200 per pack
View Details
Call for Price
SLEEVES CRIMPING 12-1/2GA 250@
The gritted C2L sleeve is 70% longer than the C23 and requires at least two side by side crimps to achieve full strength. It can be used in place of the C23 sleeve in many applications. The C2L works especially well on Solidlock, Tightlock and other woven wire style fences because these fences are normally tightened to lower tensions. Use of the C2L in these applications saves money because you need only one sleeve per line splice versus two of the C23 size. For use with 16 - 12.5 gauge wire.
- Made in USA.
View Details
Call for Price
FENCE CRIMP SLEEVE 9GA 50@
The C34 gritted crimp sleeve can be used for 10.5 gauge smooth wire or 14 - 15.5 gauge high-tensile barbed wire. When crimping the sleeve, put it into the tool slot marked 3-4 and compress it into a cylindrical shape. Do not split the sleeve into an 8 shape.
View Details
Call for Price
TENSION SPRINGS
Tension Springs are used for several purposes:
- To indicate the amount of tension on the wire
- To act as a shock absorber
- To keep fence tension more uniform
When the spring is compressed to the first notch in the drawbars, it is under 150 pounds of tension, which is common for electric fences. When the second notch is exposed, there are about 250 pounds of tension on the
fence.
All of Kencove's springs have a class 3 galvanized coating and strong drawbars. The spring has a normal holding strength of over 2,200 pounds. This is the highest strength and longest lasting spring on the market.
Length (uncompressed): 10-3/4"
View Details
Call for Price
210S SPRING LOAD IN-LNE STRAINR
- Versatile use -- traditionally for end of line straining or for in line straining by threading wire through strainer instead of tying an extra knot - Long life galvanized steel frame
- Robust, high quality spring loaded locking clip
- Increased spool hub thickness provides extra strength 12 tooth spool, for fine adjustment and easy tightening action
- Tighten with Ratchet Handle
View Details
Call for Price
